Interior Painting Preparation Tips for Walls

Painting interior walls can be more difficult than you can think of. There are problems always occur throughout the painting project most probably are because of inappropriate steps or no steps were taken to make sure the painting was done correctly. Preparation is the key to a successful painting job. If all you want is to have a well painted rooms then you most definitely also want to ensure that your money spent on your interior painting job will work well for you for many years to come. It all begins with painting preparation.

First thing is to make your tools available for use such as paintbrushes as well as paint rollers, including the extensions. In addition, paint pan, painters tape, drop clothes as well as other application tools for hard to reach spaces, such as a flat applicator to slide between tight areas will also be needed. Other than that, you will want to read through the manufacturer’s guides on the appropriate way to apply the paint, too. Through this manufacturer’s directions you will learn what type of paint it is and the amount of ventilation you will need. Also, some paint manufacturers recommend that you invest 12 hours between coats. These details and instructions are important in helping to complete the project.

Next, prepare the walls. Tips on preparing the walls for painting are as follows:

If needed, check to make sure that the walls have been patched using compound as appropriate. Sand down these areas afterwards. If necessary, apply a first coat of flat paint over these areas prior to painting. Check to ensure that the compound has been completely dried before trying to paint over it.

If you identify moisture problems with the wall, take corrective action to fix them. If this is a consistent problem, an ideal solution is to apply a sealant over the walls to protect them and the paint against the moisture.

It’s important to wash down the walls, too. At the end of the project, it’s common to see greasy spots or areas of dirt or debris on the wall. A solution of water and a mild detergent is advised to be used here. Try not to saturate the walls with water, though. Take a break and let the wall fully dry first before you proceed with painting.

There are edges where you don’t want to paint, apply painter’s tape in this circumstance, including window sills, doorframes and both the ceiling and baseboards. Hours of time will be saved if this is done to avoid having to clean up the mess at the end.

If the existing paint on the wall is a glossy paint, then painting a coat of flat paint over the top of it is suggested before proceed to apply the paint you would like to. This will help with adherence of the paint on the space.

That’s all the steps it needs to be taken to be ready for painting the walls in your home. While there are not too many steps involved, missing just one of them can result in the entire project to be more challenging than it needs to be. Most of the tools which are needed during painting preparation phase and wall painting phase are readily available at reasonable price, too.

share on: facebook

Related Posts by Categories